Pune researchers develop an environment-friendly way for the conversion
In their quest for greener sources of energy, researchers are focusing their attention on efficient conversion of biomass into biofuel. Scientists at the National Chemical Laboratory (NCL), Pune, have developed a faster, environment-friendly method for conversion of industrial biomass into biodiesel.
An organic compound called furfural is produced from agricultural waste biomass like bagasse, cotton seed hulls, sawdust, oat hulls, rice hulls, wheat husk and bran. Typically furfural is first chemically changed into furfuryl alcohol. It is processed further to produce alkyl levulinates, such as ethyl levulinate. The process, however, involves multiple steps and takes a relatively long time. The NCL team has developed a new version of zeolite catalyst – HPW/Meso-HZ-5 - which can speed up the process of conversion.
The catalyst exhibits good performance with 100% furfural alcohol conversion along with 97% ethyl levulinate biodiesel yield and 3% ethoxy methyl furan yield. Ethoxy methyl furan is used as a food additive. The catalyst showed superior activity when compared to the parent H-ZSM-5 and Meso-HZ-5used separately.
“Due to higher number of active sites and larger pore size the travel distance is reduced, thereby improving accessibility of active sites. Low molar ratio of reactants would do away with the separation cost associated with unreacted ethanol, operational cost and reactor size, making the process economically viable and industrially safe,” researchers said.
India is among leading producers of rice, pulses, wheat, and the world’s second largest producer of sugarcane. A large amount of agricultural waste is produced. Converting this non-food waste into furfural and upgrading it further to biodiesel could give additional income to farmers and also generate employment.
Globally, researchers are seeking to explore biomass as a sustainable alternative feedstock. Ethyl levulinate is one of the top ten biomass-derived ‘building blocks’ recognized for use in biorefineries. It is a renewable oxygenate additive and can be added to diesel.In this context, the new process would comprise green chemistry and engineering principles such as mild reaction conditions, solid catalyst, reduced byproduct formation, the usage of green solvent (ethanol), sustainable and renewable synthetic routes, and lowering cost involved in separation and purification.
The research team included Kakasaheb Y. Nandiwale, Ashwini M. Pande and Vijay V. Bokade. The study results have been published in journal Environmental Progress & Sustainable Energy. (India Science Wire)
We are a voice to you; you have been a support to us. Together we build journalism that is independent, credible and fearless. You can further help us by making a donation. This will mean a lot for our ability to bring you news, perspectives and analysis from the ground so that we can make change together.
Comments are moderated and will be published only after the site moderator’s approval. Please use a genuine email ID and provide your name. Selected comments may also be used in the ‘Letters’ section of the Down To Earth print edition.